Canon_Logo_640x400
kla_onetrust
Pfeiffer_Vacuum_+_Fab_Solutions_Logo_2024
Osaka vacuum Logo 1
Kashiyama Logo 2
ir_logo_v1
Logo Inficon
Logo Cosmo
Superlok logo
1125_SKY_CDG045D___45C

INFICON SKY® CDG045D Capacitance Manometers (Vacuum Pressure Gauges/ Bộ đo áp suất chân không)

Giá bán: Liên Hệ.

  • Mô tả sản phẩm

INFICON SKY® CDG045D Capacitance Manometers

“45°C temperature controlled, full scale 0.05 … 1000 Torr / mbar”

INFICON SKY CDG045D manometers are your best choice for high accurate total pressure measurement and control.

CDG045D gauges are temperature controlled at 45 °C for superior signal stability and repeatability. They are available for full scale ranges from 50 mTorr to 1000 Torr, with all common flange types and fieldbus interfaces and provide a linear 0 to 10 V, gas type independent, pressure signal. INFICON capacitance manometers use an ultra pure alumina ceramic diaphragm which is corrosion proof.

The advantages of the ceramic sensor are better signal stability, faster recovery from atmosphere, short warm up time and an extraordinary lifetime. INFICON CDG are high quality, cost effective pressure sensors for demanding vacuum applications.

Also available with PROFINET® digital interface and with current loop 4 … 20 mA!

Advantages

  • Lower CoO (cost of ownership), 50% faster warm up, energy efficient low power consumption
  • Easy integration, wide variety of full scales, flanges and interfaces, standard with two set points
  • Easy one push button or remote signal zero command, zero offset adjustable
  • Diagnostic port for quick service and maintenance
  • Two year warranty, longer life time with advanced heating concept and gauge protection
  • No long term recalibration due to excellent signal stability and repeatability, even in harsh plasma applications
  • Compliance & standards: CE, EN, UL, SEMI, RoHS

Typical applications

  • Etch, CVD, PVD and other semiconductor production processes
  • Chemical and corrosive vacuum processes
  • General thin film and vacuum processes
  • Reference sensor for monitoring of test instruments according to international standards
  • Transfer standard for traceability measurements

Specifications

1000 Torr, 1100 mbar
500 … 1 Torr / mbar
0.5 … 0.05 Torr / mbar
Accuracy % of reading0.15
Resolutionpercent FS0.003
Output signal (analog)V (dc)0 … +10
Response time ms30
Materials exposed to vacuumAluminum oxide ceramic (AI2O3), stainless steel (AISI 316L)

Download full specifications