Canon_Logo_640x400
kla_onetrust
Logo Inficon
Logo Cosmo
Superlok logo
Horiba Logo
Pfeiffer_Vacuum_+_Fab_Solutions_Logo_2024
edwards_vacuum_vector_logo
ElmoRietschle_Logo_RGB_scaled
Osaka vacuum Logo 1
Kashiyama Logo 2

COSMO QLC Series / LC Series (Manual Leak Calibrators/ Thiết bị hiệu chuẩn rò rỉ thủ công)

Giá bán: Liên Hệ.

  • Mô tả sản phẩm

Manual Leak Calibrator là gì?

Manual Leak Calibrator là một bộ hiệu chuẩn dành cho Máy kiểm tra rò khí Air Leak Tester kiểu áp suất chênh lệch, có thể cung cấp sự thay đổi thể tích cho mạch kiểm tra theo cách thủ công.
Leak Master cho phép kiểm tra độ nhạy của máy kiểm tra rò rỉ nhanh chóng và dễ dàng. Nó cũng được sử dụng để thiết lập tự động K(Ve).

Edge & Function



QLC(Quick Leak Calibrator)

It gives predetermined volume displacement spontaneously simply by pushing a button.

LC(Leak Calibrator)

It is a cylinder type manual leak calibrator that can give an accurate volume displacement that is specified on the scale.

Spec



Calibrator Specifications

                      Name         ModelMaximum Volume DisplacementOperating pressure range (Recommended range)Remarks
Auto Leak Calibrator

ALC series

ALC-050.5mL0~4.9MPaLoaded on Air Leak Testers.  K(Ve) Automatic setup is available.Can used for K(Ve) check

Pilot Pressure: 0.4 to 0.7 MPa

ALC-11mL0~2MPa
ALC-44mL0~0.8MPa
ALC-1010mL0~0.2MPa
Quick Leak Calibrator

QLC Series

QLC-00210.2mL0~0.5MPaIt gives predetermined volume displacement spontaneously by simply pushing a button.Can be used where the Detection (DET) timer is rather short.
QLC-01011mL0~0.5MPa
QLC-04014mL0~0.5MPa
QLC-100110mL0~0.2MPa
Leak Calibrator

LC Series

LC-111mL0~0.4MPa検Turn the dial during Detection (DET) stage to cause volumetric change.For the cases DET timer is short, the timer has be extended.
LC-121mL0~0.4MPa
LC-222mL0~0.2MPa
LC-424mL0~0.1MPa

 

 

Manual Leak Calibrator là một bộ hiệu chuẩn dành cho Máy kiểm tra rò khí Air Leak Tester kiểu áp suất chênh lệch, có thể cung cấp sự thay đổi thể tích cho mạch kiểm tra theo cách thủ công.Leak Master cho phép kiểm tra độ nhạy của máy kiểm tra rò rỉ nhanh chóng và dễ dàng. Nó cũng được sử dụng để thiết lập tự động K(Ve).